Категории

Производители

1800mah 65C 4S (14.8V) Turnigy Graphene Lipo аккумулятор

производитель: Turnigy

1800mah 65C 4S (14.8V) Turnigy Graphene Lipo аккумулятор

подробнее


3 310 руб.

9067000133-0

Товар временно отсутствует (ожидается)


Товар временно отсутствует.
Уведомить меня когда товар снова станет доступным

Программа скидок При покупке данного товара Вы получите скидку 60 руб. в следующем заказе (скидка добавляется в корзине, так же их можно накапливать)

 Примечание от магазина: Turnigy Graphene лучшие на данный момент аккумуляторы для гоночных квадрокоптеров отдающие большие токи без просадок напряжения и имеющие гораздо больше циклов заряд-разряда по сравнению с простыми LiPo аккумуляторами. 

 TURNIGY, the name synonymous with performance, reliability and innovation is excited to release a powerful new battery chemistry in the Turnigy Graphene!
What does this really mean for you? Well not only do Graphene batteries go harder for longer but they're unlike anything you have seen or used before.
Turnigy Graphene packs utilize carbon in the battery structure to form a single layer of graphene just 0.335nm thick, making that type of battery substrate the thinnest known to mankind. The graphene particles form a highly dense compound allowing electrons to flow with less resistance compared to traditional Lipoly battery technologies.
The result is a battery capable of maintaining greater power output whilst remaining much cooler under load. Since heat and resistance are the natural enemy of batteries Graphene chemistry has significantly reduced these problems and the result is an incredible boost in cycle life.
Turnigy Graphene batteries are the new standard for serious hobbyists who require POWER ON DEMAND.
Specs:
Capacity: 1800mAh
Voltage: 4S1P / 4 Cell / 14.8V
Discharge: 65C Constant / 130C Burst
Weight: 240g (including wire, plug & case)
Dimensions: 107x36x34mm
Balance Plug: JST-XH
Discharge Plug: XT-60
Note: Graphene LiPo Batteries only require a standard Lipo battery charger.
Advantages over traditional Lipo batteries.
• Power density: 0.15-0.17kw/kg (5Ah-16Ah)
• Power density: 0.13-0.15kw/kg (1Ah-4.9Ah).
• Stable High pack voltage through duration of use.
• High discharge rate, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, packs stay much cooler under extreme conditions
• Higher capacity during heavy discharge.
• Maintains higher pack capacity even after hundreds of cycles
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life 600+

Отзывов нет.

Только зарегистрированные пользователи могут оставлять отзывы.

Корзина  

Нет товаров

Всего 0 руб.

Корзина Оформить

Наши партнеры